Aluminum Composite Panel Installation Guide for Modern Building Projects

알루미늄 복합 패널 are now a common choice in commercial and large-scale exterior cladding, especially for contractors and project owners who value durability, clean architectural lines, and stable long-term performance. A successful aluminum composite panel Installation does more than complete a façade; it ensures the building stays weather-resistant, safe, and visually consistent for years. Shingkwang, a leading ACP Panel manufacturer, summarizes the installation steps and practical points that professionals should pay attention to.

What to Check Before Aluminum Composite Panel Installation?

Before the first panel is fixed onto the subframe, several technical conditions must be confirmed to avoid later issues.

Structural condition of the base surface
The wall or steel structure must support the ACP system’s weight and remain stable under wind pressure.

Allowance for thermal movement
During the installation, installers need to reserve gaps so panels can expand and contract naturally without bending or cracking.

Wind-load and height calculation
High-rise buildings or coastal areas require thicker panels and a reinforced framing system.

Fire-safety requirements
Many commercial buildings—shopping malls, schools, airports—require FR or A2 fire-rated ACP. This must be decided before installation begins.

Good preparation significantly reduces the difficulty and helps achieve better alignment and durability.

Tools and Materials Needed for ACP Installation

To complete a smooth installation, installers will typically prepare:

• 알루미늄 복합 패널
• Aluminum or galvanized steel subframe
• Fasteners, rivets, and brackets
• Corner profiles
• Weatherproof silicone sealant
• Cutting and drilling tools
• Protective film and safety equipment

Using high-quality ACP panels and accessories is just as important as the installation itself, especially for long-term exterior façade projects.

Step-by-Step Aluminum Composite Panel Installation

Step 1: Subframe Alignment

A stable subframe is the foundation of a reliable cladding system. Install the vertical and horizontal profiles according to engineering layout, and use a level or laser line to confirm alignment. A well-aligned subframe makes the installation faster and more accurate.

Step 2: Cutting and Fabrication

그리고 ACP Panels should be cut while the protective film is still on to prevent scratches. Follow the recommended routing depth when folding edges, especially for cassette panels. Clean cutting ensures the installed façade remains flat and neat.

Step 3: Fixing Panels to the Structure

Riveting Fixing Method
Suitable for large projects and high-rise buildings. The drilled hole should be slightly larger than the rivet to provide expansion space. Only corrosion-resistant rivets should be used for exterior projects.

Cassette System
Common for premium façade projects. The panel edges are folded into a cassette form and hooked onto the subframe. This method provides a clean look and better control of joint spacing.

Both systems can achieve strong performance when installed correctly.

Step 4: Joint Sealing and Waterproofing

Good sealing affects how well the façade withstands rain and moisture. Use weather-resistant silicone on all joints and leave proper expansion gaps for temperature changes.

Step 5: Final Checking

After installation, check alignment, joint uniformity, and ensure no fasteners are loose. Remove the protective film only after inspection. A careful final check improves overall appearance and reduces future maintenance issues.

Common Problems to Avoid During Installation

Even experienced teams may encounter errors. The following issues should be avoided:

• Over-tightening screws, restricting thermal expansion
• Cutting panels without the protective film
• Using subframes that are not corrosion-resistant
• Poor sealing in wet or dusty environments
• Ignoring ACP manufacturer fabrication guidelines

Small mistakes can accumulate and affect overall façade quality, so these details matter during aluminum composite panel installation.

Why Choose Shingkwang Aluminum Composite Panels?

로서 professional ACP Panel manufacturer and supplier, Shingkwang develops products that support stable, efficient, and long-lasting installations.

Reliable flatness and strength
우리의 high-quality ACP Panels remain stable during installation and maintain a smooth surface over time.

Fire-rated options (FR and A2)
We offer custom fireproof ACP panels , which are wuitable for commercial and public buildings that require strict fire compliance.

Weather and UV resistance
Ensures long-term durability for outdoor usage.

Wide range of colors and finishes
Including solid colors, metallic tones, woodgrain, marble, brushed surfaces, and custom finishes.

Technical assistance
We support projects with installation drawings, layout guidance, and OEM services.

Shingkwang custom ACP is widely used in airports, commercial complexes, residential towers, industrial buildings, and renovation projects worldwide.

결론

A successful aluminum composite panel installation comes from careful planning, consistent workmanship, and dependable materials. For construction companies, façade contractors, and importers, following correct installation steps ensures a building façade that is safe, visually appealing, and structurally stable. With the right combination of engineering knowledge and high-quality ACP from 신광, each project can achieve a cleaner and longer-lasting finish. If you need professional ACP supply or installation consultation, feel free to 문의하기.